Blog | upffront.com

  • There are no suggestions because the search field is empty.

 

Backstay purchase systems for small keelboats

undefined-Jun-13-2023-09-16-59-0554-AM-1-1

 

We have previously reported on the benefits of composite backstays: to reduce weight aloft and increase performance. An effective control system to finely tune backstay load is equally important, particularly for a race yacht. In this blog we look at 3 popular configurations for backstay purchase systems using block and tackle. 

 

Spinnaker Snuffers - Better Than Furling?

undefined-May-18-2023-02-41-23-7774-PM-1

Image credit - C-Tech

 

A snuffer is a simple, reliable method of dousing an asymmetric spinnaker. Despite advances in furling technology, snuffers remain the first choice for many offshore race yachts such as Class 40 and IMOCA. In this blog we look at how to select the correct length of snuffer for your sail, why snuffers dominate in short-handed offshore racing and where a furling asymmetric might be preferred. To help answer these questions we sat down with Nathan Steffenoni, co-director of OneSails GBR South. As you might expect, the considerations are very much case dependent, so Nathan was keen to caveat many of his responses. 

Adding a Staysail? Mast Hardware Options

main image (5)-1

 

We have previously reported on the benefits of adding a staysail in our guest blog: Turbo charge your ride with a staysail. We also looked at different setup options such as furling vs hanks here:

 

But what about the mast fitting? For people looking to retrofit a staysail on a rig without an existing staysail sheave or tang, this can often be the crunch point. In this blog we explore some of the possible approaches to tackling this, primarily in relation to aluminium rigs. 

 

A Guide to Bowsprit Configuration

TR-AS_Trogear Bowsprit Shaft In Use_010-1

 

A bowsprit is now an almost inevitable feature of a racing yacht or performance cruiser and there are also a number of off-the-shelf retrofit options available. The uptake is due in part to the popularity of asymmetric downwind sails which offer ease of handing, particularly when sailing with reduced crew. But even for a predominantly symmetric spinnaker boat, a bowsprit is necessary for flying a code zero or other specialist reaching asymmetric. In this blog we look at how to best setup a bowsprit to suit your sail inventory. 

The Best Code 0 furlers for 25-30ft Sailing Boats

Trogear-Bowsprit with code 0 furler

 

If you have a 25-30ft sailboat and you are looking to boost your sailing performance with a code zero or asymmetric spinnaker then you will need a furler in the 900-1000kg working load range. There is a decent selection of different products available at this size, but which one should you chose? In this blog we run through the relative pro’s and con’s of the main contenders.

Selden Bowsprits: An elegant solution that really stands out!

Selden bowsprit on a sailboat

 

Selden have been making sailing yacht masts since the 1960s and what started as a company that produced basic wooden masts has evolved into a world leading brand with an extensive range of sail handling and deck hardware systems. Some of their products have become household names in their own right e.g. Furlex furlers, but in this blog we take a closer look at their extremely popular, retrofit extendable bowsprits.

We are constantly reporting on the latest innovations in the marine industry which offer weight savings whilst, at the same time, increasing safety factors. The result: lighter, faster, safer and more exciting sailing.

Recent Posts

Popular Posts

Posts by tag

See all


X